todo
This is an old revision of the document!
Table of Contents
Things To Do / How Can I Help?
Mini Projects
Fit shelving under G8 workbenches
Status: in progress, Tim
Drill organisation
All of our drills (bits) currently sit in a single box. We should have a storage system for making it easier to find the right type and size, and to see what we have or what is missing.
- Make or buy an organiser:
- Multiple holes for each size of drill (because one drill of each size is not enough for a hackerspace)
- Sections for HSS, brad-point and masonry
- Audit the drills. Dispose of bad ones. Sharpen where possible. Identify what we need to purchase for replacements/spares.
- Identify a suitable drill sharpening system to keep the drills in good condition.
Install ventilation in G8 Workshop
We have permission from Summerhall to install a fan in the external wall. There are two sections where previous vents have been bricked-up, and one of these should be opened and a fan installed.
- Plan how to remove the bricks safely and without damaging the rest of the wall.
- Source a suitable fan.
- Do the work…
- Clean/repaint as required.
New Room
G11:
- Fit PIR sensor
and door-closed sensorto G11 [Tim]
G8:
- Arrange disposal/re-homing of the desks [Al]
Build an air filtering system to capture dust (since G8 doesn't have extraction or a window)- Fit an external extractor fan (permission has been granted by Summerhall)
- Build a dust extraction system to capture dust from the power tools
- Purchase and install sensitive smoke alarm(s) to warn us before we cause a building evacuation
- Build a standalone workbench (either 150x75cm or 180x75cm)
- Fit shelf under right-section of new workbenches (40cm depth, wall-mounted)
Other Stuff
- Design a test pattern for checking/calibrating the laser cutter
- Update OpenStreepMap to identify all the local takeaways
- Sort the PC parts and peripherals
Make some door wedges
todo.1474968767.txt.gz · Last modified: 2016-09-27 09:32 by tim