User Tools

Site Tools


pcbetching

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pcbetching [2015-10-23 23:58]
miek [Equipment] switch from onecall link
pcbetching [2015-11-09 18:49] (current)
miek [Developing] Fix typo
Line 21: Line 21:
 This step removes any photoresist that has been exposed to UV light in the previous step. This step removes any photoresist that has been exposed to UV light in the previous step.
  
-Place your PCB in the '​Dev'​ tray and use the S110 applicator to apply the developer. Press firmly to open the internal valve and release some of the developer, then scrub the board gently for somewhere around 30 seconds. Be very careful of damaging the applicator sponge on the edges of the PCB.+Place your PCB in the '​Dev'​ tray and use the SN110 applicator to apply the developer. Press firmly to open the internal valve and release some of the developer, then scrub the board gently for somewhere around 30 seconds. Be very careful of damaging the applicator sponge on the edges of the PCB.
  
 Once developed, your design should be clearly visible on the PCB with a slight green tinge. Once developed, your design should be clearly visible on the PCB with a slight green tinge.
pcbetching.txt ยท Last modified: 2015-11-09 18:49 by miek