User Tools

Site Tools


lasercutter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
lasercutter [2018-07-21 22:06]
alfie [Laser Cutter]
lasercutter [2019-01-15 23:46] (current)
mirza [Resources]
Line 2: Line 2:
  
 TRAINING REQUIRED BEFORE USE. TRAINING REQUIRED BEFORE USE.
 +
 +HOURS OF USE ARE LIMITED TO **8PM-8AM** UNTIL ADDITIONAL FUME EXTRACTION HAS BEEN INSTALLED.
  
 LS3060 from [[http://​www.hpclaser.co.uk/​|HPC Laser]]\\ LS3060 from [[http://​www.hpclaser.co.uk/​|HPC Laser]]\\
Line 268: Line 270:
 2018-07-19: 2018-07-19:
   * Mike re-calibrated the axes. Previously they were off by 1mm over 260mm in Y and 0.5mm over 180mm in X.   * Mike re-calibrated the axes. Previously they were off by 1mm over 260mm in Y and 0.5mm over 180mm in X.
 +
 +2018-08-??:
 +
 +  * DIY chiller failed and was replaced with old ambient cooler from big laser. Seems to be keeping up with normal cutting/​engraving,​ but cannot deal with the heat from extended 100% cuts. 
 ===== Other Specifications (for maintenance) =====  ===== Other Specifications (for maintenance) ===== 
  
Line 283: Line 289:
   * [[http://​www.repairfaq.org/​sam/​lasersam.htm|Sam'​s Laser FAQ]]   * [[http://​www.repairfaq.org/​sam/​lasersam.htm|Sam'​s Laser FAQ]]
   * [[http://​www.lbp.co.uk/​pdfs/​pdf_files/​cleaning_co2_optics.pdf|Cleaning of CO2 laser optics]]   * [[http://​www.lbp.co.uk/​pdfs/​pdf_files/​cleaning_co2_optics.pdf|Cleaning of CO2 laser optics]]
 +  * {{ :​lasercut_laser_palette.zip | Zeno's LaserCut5.3 Palette for Inkscape, makes all 40 layers colours match}}
  
 {{tag>​equipment}} {{tag>​equipment}}
lasercutter.1532210796.txt.gz ยท Last modified: 2018-07-21 22:06 by alfie