Differences

This shows you the differences between two versions of the page.

--- lasercutter [2019-07-18 10:31] – [Laser Cutter] tim
+++ lasercutter [2019-07-23 21:05] – [Recommended Settings] mirza
@@ Line 48: / Line 48: @@
 Please add your own preferred settings here, but do not edit the existing entries. If you believe a setting is inappropriate, use <del>strikeout</del> and add a new entry with your corrections. Add your name to the notes so that other users can make an informed decision where there is a conflict of recommendations.
-^ Material ^ Engrave Speed ^ Engrave Power ^ Cut Speed ^ Cut Power ^ Notes ^
+^ Material ^ Cut Speed ^ Cut Power ^ Notes ^
-| Acrylic 3mm | 200 | 21 | 8 | 98 | From HPC Manual |
+| Acrylic 3mm | 8 | 98 | From HPC Manual |
-| Acrylic 5mm | 200 | 21 | 3.5 | 98 | From HPC Manual |
+| Acrylic 5mm | 3.5 | 98 | From HPC Manual |
-| Acrylic 10mm | 200 | 21 | 1 | 98 | From HPC Manual |
+| Acrylic 10mm | 1 | 98 | From HPC Manual |
-| Ply 1.5mm | 200 | 17 | 10 | 98 | From HPC Manual |
+| Ply 1.5mm | 10 | 98 | From HPC Manual |
-| Ply 3mm | 200 | 17 | 7 | 98 | From HPC Manual |
+| Ply 3mm | 7 | 98 | From HPC Manual |
-| Ply 5mm | 200 | 17 | 7 | 98 | From HPC Manual |
+| Ply 5mm | 7 | 98 | From HPC Manual |
-| Ply 6mm | 200 | 17 | 1.5 | 98 | From HPC Manual |
+| Ply 6mm | 1.5 | 98 | From HPC Manual |
-| MDF 3mm | 200 | 25 | 5 | 98 | From HPC Manual |
+| MDF 3mm | 5 | 98 | From HPC Manual |
-| MDF 4mm | 200 | 25 | 4 | 98 | From HPC Manual |
+| MDF 4mm | 4 | 98 | From HPC Manual |
-| MDF 6mm | 200 | 25 |  |  | From HPC Manual |
+| MDF 6mm |  |  | From HPC Manual |
-| Corrugated Cardboard 3mm  | 200 | 20 | 12 | 98 | From HPC Manual |
+| Corrugated Cardboard 3mm  | 12 | 98 | From HPC Manual |
-| Hardboard 3mm | | | 3 | 98 | From HPC Manual |
+| Hardboard 3mm | 3 | 98 | From HPC Manual |
-| Paper | 200 | 15 | 20 | 20 | From HPC Manual |
+| Paper | 20 | 20 | From HPC Manual |
-| Card | 200 | 20 | 25 | 40 | From HPC Manual |
+| Card | 25 | 40 | From HPC Manual |
-| Mount Board | 200 | 20 | 12 | 98 | From HPC Manual |
+| Mount Board | 12 | 98 | From HPC Manual |
-| Engraving Laminate | 20 | 21 | 15 | 80 | From HPC Manual |
+| Engraving Laminate | 15 | 80 | From HPC Manual |
-| Engraving Laminate 1.5mm | 200 | 80 | 22 (x3 passes) | 80 | Recommended by Random |
+| Engraving Laminate 1.5mm | 22 (x3 passes) | 80 | Recommended by Random |
-| Funky Foam | not suitable || 25 | 25 | From HPC Manual |
+| Funky Foam | 25 | 25 | From HPC Manual |
+^ Material ^ Engrave Speed ^ Engrave Power ^ Notes ^
+| Acrylic | 200 | 21 | From HPC Manual |
+| Ply | 200 | 17 | From HPC Manual |
+| MDF | 200 | 25 | From HPC Manual |
+| Corrugated Cardboard | 200 | 20 | From HPC Manual |
+| Paper | 200 | 15 | From HPC Manual |
+| Card | 200 | 20 | From HPC Manual |
+| Mount Board | 200 | 20 | From HPC Manual |
+| Engraving Laminate | 200 | 21 | From HPC Manual |
+| Engraving Laminate 1.5mm | 200 | 80 | Recommended by Random |
 ===== Z-axis adjustment/focussing the laser =====