Differences

This shows you the differences between two versions of the page.

--- bantam_lathe [2019-05-08 23:01] – alfie
+++ bantam_lathe [2019-05-15 13:54] – [Risk Assessment (WIP)] Adding electrical hazzards risks and mitigation vzickus
@@ Line 30: / Line 30: @@
 | **Trapping / Pinching** | Closing movements between tools, workpieces and other machine parts under power feed can present a trapping hazard. | Machine users are to ensure they are well aware of their environment and other workshop users, and must disengage power feed and make the machine safe if distracted. Before starting the machine, users should ensure the power feed is either engaged or disengaged as they are expecting |
 | ** Flying parts** | Workpieces (and chuck keys or tools) can be ejected violently if not held correctly | The lathe should not be started until the user has confirmed the workpiece and tool is properly secured, the chuck key is removed, and the work area / machine ways are completely clear. The headstock should not be used to store parts / tools as these can fall into the spinning machinery. Self-ejecting/spring-loaded chuck keys are advised. |
-| **User injury** | Contact with rotating parts and hot swarf can cause cuts, abrasions and burns. | Appropriate feeds and speeds should be selected to minimise stringy chips/"birdnesting". Brushes/etc are preferred for clearing hot chips. Gloves should be worn when handling chips directly. //NB: Gloves **should not** be worn whilst the machine is in operation - see below.// Eye protection should be worn. |
+| **User injury** | Contact with rotating parts and hot swarf can cause cuts, abrasions and burns. | Appropriate feeds and speeds should be selected to minimise stringy chips/"birdnesting". Brushes/etc are preferred for clearing hot chips. Gloves should be worn when handling chips directly. //NB: Gloves **should not** be worn whilst the machine is in operation - see below.// Eye protection must be worn. |
 | **Entanglement** | Long hair, dangling jewellery, loose clothing or gloves can become entangled with rotating parts, dragging the user onto them. Application of cutting oil using a brush presents an entanglement risk. | Loose clothing should not be worn, or should be covered with an appropriately secured apron. Long hair is to be tied back. Loose jewellery should be removed. Gloves should not be worn when the machine is in operation. |
-| **Slips and trips** | Spilled cutting oil can make the area around the machine slippery | |
+| **Lack of space/pushing by others** | Limited space can cause the user of the lathe to be pushed by other people in the space. | Area surrounding the lathe should be closed of when in use.|
-| **Electrical hazards** | | |
+| **Slips and trips** | Spilled cutting oil can make the area around the machine slippery. | Appropriate footwear should be worn. Prompt removal of spilled cutting oil.|
-| **Fire** | | Fire extinguishers are available in the vicinity of the machine. |
+| **Electrical hazards** | Electrical shock due to damaged wiring. | Regular PAT testing. Inspection of cables prior to use.|
+| **Fire** | Hot flying metal pieces igniting surrounding flammable material. | Ensure surrounding area is clear of flammable material. Particular attention must be paid to nearby sawdust accumulation. Fire extinguishers are available in the vicinity of the machine. |
 | **Lone Working** | | |
@@ Line 41: / Line 42: @@
   * Entanglement with the spindle, chuck, workpiece or feed mechanism.
+  * Being pushed in by other users due to lack of space.
   * Unsecured spinning things flying off - chuck key, loose work, things falling from the headstock onto the chuck.
   * Sharp/hot metal chips.